於林鋒,管 文,樊俊江
裝配式建筑預制輕質保溫墻體系統設計與性能研究
Design and Research on Precast Lightweight Insulation Wall System of Prefabricated Buildings
2020年1期 ? No.285 ? P65-68+72
裝配式建筑;輕質保溫墻體;夾心保溫;輕骨料混凝土
Prefabricated building; Precast lightweight insulation wall; Sandwich insulation; Lightweight aggregate
2020年1期 No.285 P65-68+72
10.19761/j.1000-4637.2020.01.065.05
國家重點研發計劃(2016YFC0701904)
於林鋒,管 文,樊俊江
上海市建筑科學研究院,201108
於林鋒,管文,樊俊江.裝配式建筑預制輕質保溫墻體系統設計與性能研究[J].混凝土與水泥制品,2020(1):65-68+72.
YU L F,GUAN W,FAN J J.Design and Research on Precast Lightweight Insulation Wall System of Prefabricated Buildings[J].China Concrete and Cement Products,2020(1):65-68+72.
瀏覽量:
1000
裝配式建筑預制輕質保溫墻體系統設計與性能研究
Abstract: Based on the technology of lightweight aggregate concrete, the design of precast lightweight thermal insulation wall system for prefabricated buildings was carried out, and the performance of thermal insulation wall system was comprehensively tested and analyzed. The results show that the waterproofing performance of lightweight aggregate concrete insulation wall is inferior to that of ordinary concrete in the same strength grade. The pull-out and shear bearing capacity of lightweight aggregate concrete insulation wall and its FRP connectors are reduced by 12% and 13%, respectively, and the weight of the system can be reduced by 23%. The design of lightweight aggregate concrete inner-leaf wall board is 100 mm, XPS insulation board is 40 mm, and lightweight aggregate concrete outer-leaf wall board is 55 mm. The prefabricated lightweight aggregate concrete sandwich thermal insulation external wall panel system composed of face brick decoration layer can meet 65% of the building energy saving design requirements and waterproof requirements.
英文名 :
Design and Research on Precast Lightweight Insulation Wall System of Prefabricated Buildings
刊期 :
2020年1期 ? No.285 ? P65-68+72
關鍵詞 :
裝配式建筑;輕質保溫墻體;夾心保溫;輕骨料混凝土
Key words :
Prefabricated building; Precast lightweight insulation wall; Sandwich insulation; Lightweight aggregate
刊期 :
2020年1期 No.285 P65-68+72
DOI :
10.19761/j.1000-4637.2020.01.065.05
文章編號 :
基金項目 :
國家重點研發計劃(2016YFC0701904)
作者 :
於林鋒,管 文,樊俊江
單位 :
上海市建筑科學研究院,201108
於林鋒,管 文,樊俊江
於林鋒,管文,樊俊江.裝配式建筑預制輕質保溫墻體系統設計與性能研究[J].混凝土與水泥制品,2020(1):65-68+72.
YU L F,GUAN W,FAN J J.Design and Research on Precast Lightweight Insulation Wall System of Prefabricated Buildings[J].China Concrete and Cement Products,2020(1):65-68+72.
摘要
參數
結論
參考文獻
引用本文
摘要:以輕骨料混凝土技術為基礎,開展裝配式建筑預制輕質保溫墻體系統設計,并對保溫墻體系統性能進行了綜合測試分析。研究結果表明:與相同強度等級的普通混凝土相比,輕骨料混凝土保溫墻體的防水性能不及普通混凝土,其與FRP拉接件的抗拉拔承載力和抗剪承載力分別降低了12%和13%,系統自重減輕了23%;設計了由輕骨料混凝土內葉墻板100 mm、XPS保溫板40 mm、輕骨料混凝土外葉墻板55 mm和面磚飾面層組成的預制輕骨料混凝土夾心保溫外掛墻板系統,可滿足65%的建筑節能設計要求和防水要求。
Abstract: Based on the technology of lightweight aggregate concrete, the design of precast lightweight thermal insulation wall system for prefabricated buildings was carried out, and the performance of thermal insulation wall system was comprehensively tested and analyzed. The results show that the waterproofing performance of lightweight aggregate concrete insulation wall is inferior to that of ordinary concrete in the same strength grade. The pull-out and shear bearing capacity of lightweight aggregate concrete insulation wall and its FRP connectors are reduced by 12% and 13%, respectively, and the weight of the system can be reduced by 23%. The design of lightweight aggregate concrete inner-leaf wall board is 100 mm, XPS insulation board is 40 mm, and lightweight aggregate concrete outer-leaf wall board is 55 mm. The prefabricated lightweight aggregate concrete sandwich thermal insulation external wall panel system composed of face brick decoration layer can meet 65% of the building energy saving design requirements and waterproof requirements.
掃二維碼用手機看
下一個
鋁酸鹽水泥基砂漿抗分散性研究
版權所有:中國混凝土與水泥制品網 蘇ICP備10086386號 網站建設:中企動力 蘇州